1

Custom Enamel Pins Cost: 2026 Factory Price Guide

Short answer: factory-direct custom enamel pins typically cost $0.55-$1.20 per unit for a 1″ (25.4 mm) pin at 100 units, plus a one-time mold fee of $25-60. Price per unit drops by 50-70% as quantity rises from 50 to 1,000 pieces. The three biggest cost drivers are size, plating, and specialty effects (glitter, glow, spinner) — not the number of enamel colors.

Last updated: November 2026. All figures below are FactoryPins factory-direct quote data for die-struck zinc alloy pins, 4-6 colors, rubber clutch backs, economy shipping.

custom enamel pins being trimmed and sorted before packing
custom enamel pins being trimmed and sorted before packing

The 60-Second Version (TL;DR)

  • A standard 1″ soft enamel pin at 100 units: $0.60-0.90/unit + $25-60 mold (one-time).
  • Order 1,000 instead of 100 and the same pin drops to roughly $0.35-0.50/unit — the mold cost gets spread thin.
  • “No setup fee” offers usually bury the mold fee in the unit price; compare total invoice cost, not unit price alone.
  • Shipping is the most commonly forgotten line item: economy air from factory to US/UK/EU/AU typically adds 7-12 days and a small per-unit freight cost that rises sharply with rush orders.

Custom Enamel Pin Price Table (Size × Quantity)

Quantity 0.75″ (19 mm) 1″ (25.4 mm) 1.25″ (32 mm) 1.5″ (38 mm)
50 pcs $1.45-1.80 $1.60-2.00 $1.85-2.30 $2.10-2.60
100 pcs $0.85-1.05 $0.95-1.20 $1.10-1.40 $1.25-1.60
300 pcs $0.55-0.70 $0.65-0.85 $0.80-1.00 $0.95-1.20
500 pcs $0.45-0.58 $0.55-0.72 $0.68-0.90 $0.82-1.05
1,000 pcs $0.35-0.45 $0.42-0.55 $0.52-0.68 $0.62-0.82

Basis: soft enamel, zinc alloy, 4-6 colors, gold/silver/nickel plating, rubber clutches. Hard enamel adds roughly 15-30% (see our soft vs hard enamel comparison).

The 5 Cost Drivers, Ranked

  1. Quantity — the biggest lever. Going from 100 to 500 units typically cuts unit price 35-45%; from 100 to 1,000 cuts it 50-60%. The mold fee is one-time, so it dilutes fast.
  2. Size — each step up in size (0.75″ → 1″ → 1.25″) adds roughly 15-25% to unit cost. Most brand logos work fine at 1″.
  3. Plating — standard gold/silver/nickel is included; antique washes and dyed black typically add $0.03-0.08/unit; dual plating adds more.
  4. Specialty effects — glitter, glow-in-the-dark, translucent and pearlescent colors typically add $0.05-0.15/unit each; spinner, slider and moving-part pins are custom-quoted and can double the unit price.
  5. Color count — the smallest lever. Up to 8 enamel colors is usually included in the base price; beyond that it’s a rounding error.

The Hidden-Cost Checklist (What Quotes Often Leave Out)

Before comparing quotes, confirm all five:

Cost item Typical range (factory-direct) How to avoid surprises
Mold / setup fee $25-60 per design, one-time Ask: “Is the mold fee included? Is it reusable for reorders?”
Proof / design fee $0 at reputable factories (free mockup + revisions) Never pay for a digital proof
Shipping Economy air 7-12 days; express 3-5 days at 3-5× the freight Confirm Incoterms and whether tracking is included
Attachment upgrades Rubber clutch standard; butterfly +$0.01-0.03; locking backs +$0.05-0.10; magnet +$0.10-0.20 Specify before quoting, not after
Packaging Poly bag standard; velour pouch +$0.15-0.40; custom card +$0.10-0.30 Retail packaging changes lead time too

A quote that looks 30% cheaper usually differs on exactly one of these five rows — most often a mold fee hidden in the unit price or slow untracked shipping.

MOQ Reality Check

Factory direct MOQ for enamel pins is typically 50 units; some suppliers advertise MOQ 1 as marketing. The economics: at 10-20 units, the mold fee dominates the invoice — a 20-unit 1″ order can run $4-6/unit all-in, versus $1.60-2.00 at 50 units. If you truly need fewer than 50 pins, either accept the high unit cost or combine designs that share one mold base.

3 Real Order Examples (From FactoryPins Order Records, 2025-2026)

  1. 100 pcs, 1″ soft enamel, school club logo, gold plating, rubber clutches: $62 mold + $85 units + $19 shipping ≈ $166 total ($1.66/pin all-in), 14 days door-to-door to Texas.
  2. 500 pcs, 1″ hard enamel, craft-brand merch, black nickel, butterfly clutches, velour pouches: $58 mold + $412 units + $68 packaging + $85 shipping ≈ $623 total ($1.25/pin all-in), 18 days to Melbourne AU.
  3. 1,000 pcs, 1.25″ soft enamel, conference giveaway, antique brass, standard packaging: $55 mold + $710 units + $110 shipping ≈ $875 total ($0.88/pin all-in), 15 days to Manchester UK.
steel pin molds stored on racks at the factory
steel pin molds stored on racks at the factory

FAQ

How much does one custom enamel pin cost?

For a standard 1-inch design, factory-direct cost is roughly $0.95-1.20 per unit at 100 pieces, dropping to $0.42-0.55 at 1,000 pieces, plus a one-time $25-60 mold fee. Small orders under 50 pieces run much higher per unit because the mold cost cannot be spread.

Why is there a mold fee for custom pins?

The mold (die) is a hardened steel tool cut to your exact design, used to stamp every pin. It typically costs $25-60 and is a one-time charge per design; a good factory keeps your mold on file so reorders skip both the fee and some setup time.

How can I get custom enamel pins cheaper?

Three levers: increase quantity past 300 units (the biggest price break), keep the design at 1″ or smaller, and stick to standard plating and packaging. Comparing total invoice cost (mold + units + shipping) instead of the headline unit price avoids the fake-cheap quotes.

How long do custom enamel pins take to make?

Standard production is 10-14 days after proof approval for soft enamel and 12-16 days for hard enamel, plus 7-12 days economy shipping to the US, UK, EU or Australia. Rush production of 5-7 days is available at most factories for a 20-50% premium, and express shipping cuts transit to 3-5 days.

Do custom pin suppliers charge for design work?

Reputable factories provide a free digital mockup and free revisions before production — design is part of winning the order. If a supplier charges a separate proof or artwork fee before showing any mockup, treat it as a warning sign.


数据来源与更新

  • Price tables: FactoryPins factory quote sheet, Q4 2026, die-struck zinc alloy basis.
  • Order examples: FactoryPins production records 2025-2026(口径:设计确认后到门时效).
  • Last updated: 2026-11

Leave a Reply

Your email address will not be published. Required fields are marked *